How to Reset a Netgear Router: Complete Step-by-Step Guide

Download Article

Co-authored by Stan Kats

Last Updated: February 22, 2024

Download Article

On Most Netgear Routers

|

On DGN2000 or DG834Gv5 Netgear Routers

|

Things You'll Need

This wikiHow teaches you how to reset your Netgear router to its factory defaults.

Method 1

Method 1 of 2:

On Most Netgear Routers

Download Article

1
Locate the "Reset" button. It's on the back of the router and may be labeled "Reset" or "Restore Factory Settings."^{[1]
X
Expert Source

Stan Kats
Cybersecurity Expert

Expert Interview. 24 June 2021.}^{[2]
X
Research source}
- The button is small and recessed to avoid accidental resets.
^{[3]
X
Expert Source

Stan Kats
Cybersecurity Expert

Expert Interview. 24 June 2021.}

Advertisement
The power light will begin to blink.^{[4]
X
Expert Source

Stan Kats
Cybersecurity Expert

Expert Interview. 24 June 2021.}
4
Release the "Reset" button. The router will reboot and the power light will glow a solid green or white.
- The Netgear router will be restored to its factory settings. Follow the instructions in the documentation for your model to set up and configure your router.

Method 2

Method 2 of 2:

On DGN2000 or DG834Gv5 Netgear Routers

Download Article

1
Locate the buttons on the side of the router labeled "Wireless" and "WPS."^{[5]
X
Research source}
2
Press and hold the "Wireless" and "WPS" buttons simultaneously for 6 seconds. The power LED will blink red.
3
Release the buttons. The router will reboot and the power LED will be solid.
- The Netgear router will be restored to its factory settings. Follow the instructions in the documentation for your model to set up and configure your router.

Tips

Submit a Tip

All tip submissions are carefully reviewed before being published

Submit

Thanks for submitting a tip for review!

Common Questions: Resetting Your Netgear Router

What happens if I reboot my Netgear router?

Rebooting your router can resolve many internet problems, including connection problems and slow network speeds. To properly reboot your router, unplug its power cable for 60 seconds and then plug it back in.

Why is my Netgear router not working?

If you can't connect to your Netgear router, you might have a weak wireless signal. The router may also be misconfigured, not plugged in, or need an update.

What should you do if a factory reset is not working?

Not holding the reset button down long enough can prevent your Netgear router from resetting. If your router's settings have not returned to their defaults after a factory reset, try holding the reset button for at least 15-30 seconds. If that doesn't work, unplug the power cable for 60 seconds, plug it back in, and then try resetting it again.

How do you change the password on a Netgear router?

While connected to your Netgear router via Wi-Fi or ethernet, go to https://www.routerlogin.net, log in using "admin" as both the username and the password," and go to Advanced > Administration > Set Password to create a new password.^{[6]
X
Research source}